The Doctor's Solution to your problem.

Do you have a Driveway, Patio or an outdoor hard surface that's in need of restoration?

Badly weathered with surface grime, weeds, algae, moss or lichen? Maybe it's oil stained or simply dull and lost its original lustre and colour?

Remember how it used to be, that newly laid bright fresh look?

Paving Doctor has the answer...

...and here's how we do it.

Step 1 A detailed clean using specialist high pressure equipment to remove all dirt, grime, moss, weeds, algae and lichen. Bringing the surface back to its original finish.
Step 2 - Stain Removal We then remove any remaining stains, for example: engine oil, gum, concrete or food stains from your drive or patio.
Step 3 - Spores and Growth If necessary the surface is then treated with a fungicidal wash to eradicate any remaining spores and deep rooted weeds.
Step 4 - Minor Repairs At this point we make good any minor repairs you may require, for example: sunken blocks, damaged tarmac, loose paving etc.
Step 5 - Jointing Sand On block paving it is essential to replace the sterilised sand removed during the power cleaning. This sand is part of the structure and provides stability to the finished paving, this leads to the finishing stage.
Step 6 - Seal and protect Now we apply an appropriate specialist resin sealer. This will seal in the jointing sand, enhance and enrich the surface and more importantly discourages future growth of weeds, moss, algae and fungi.

Oil and spillages are also easier to remove as they do not soak into the surface once the surface is fully protected. However, this does need to be maintained fairly regularly for continued protection.